Performance Introduction:
Fool 1006 is an OTL audio power amplifier circuit with a single DC power supply and a rated output power of 6W. Under the same conditions, its sound quality and output power are comparable to those of mid-range car players, and can meet the requirements of general small rooms. This IC adopts 5-pin single-row in-line plastic packaging, and has bolt hole positions for fastening the heat sink. Its shape and pin-out function are shown in Figure 3.15. The main parameters are shown in Table 3-3.
It can be seen from the parameter table that this little fool has three significant characteristics. That is, a wide frequency response and high amplification capability, as well as class A and B sliding operating point offset. When the output changes within 3DB, the low frequency band can be dived to 40HZ, and the high-frequency section can be extended to 90KHZ. Although the audio signal of more than 20KHZ cannot be heard by the human ear, it can significantly improve the clarity of the high-frequency section of music
Precautions:
Aluminum Electrolytic Capacitors/ Ceramic Capacitors
Aluminum Electrolytic Capacitors/ Ceramic Capacitors
Aluminum Electrolytic Capacitors,Electrolytic capacitor,Ceramic Capacitor
YANGZHOU POSITIONING TECH CO., LTD. , https://www.cnpositioning.com