Lamps play an important role in our lives. How can a room without light have the power to draw us home? For the heroes who have created the "entrance of returning home," the lamps and lanterns, we should take good care of them and maintain the warmth that makes us move. Here we share the lighting maintenance tips.
First, see the instructions
After buying the lamps, do not install them. You should look carefully at the markings on the lamps and read the installation instructions. Then install and use the lamps as specified in the manual. Otherwise, danger may occur.
Second, there is a problem in time to replace
According to the light source parameters provided by the sign to replace the aging lamp in time, it is found that both ends of the lamp are red, the lamp is black or dark, and the lamp does not light up. Replace the lamp in time to prevent the ballast from burning out. Unsafe phenomena.
Third, do not change the structure of the lamps
When cleaning and maintaining, care should be taken not to change the structure of the lamp, or replace the parts of the lamp. After the cleaning and maintenance is over, the lamp should be installed as it is. Do not miss or replace the parts of the lamp.
Fourth, do not switch frequently
In the use of lamps as far as possible not to switch frequently, because the lamp in the frequent start of the moment, the current through the filament is greater than the current during normal operation, making the filament temperature increased sharply to accelerate the sublimation, which will greatly reduce its life, so try to Reduce the light switch.
Fifth, correct maintenance
In the use of lamps and lanterns also need to strengthen the maintenance in order to extend its service life. The lamp of the room should always be wiped with a dry cloth, and be careful to prevent moisture intrusion, so as to avoid the phenomenon of rust damage or leakage short circuit for a long time; lights installed in toilets and bathrooms must be equipped with moisture-proof lampshades, otherwise it will greatly shorten the service life; The lights installed in the kitchen should pay special attention to the fume-proof, because the accumulation of oil stains affect the brightness of the light; light-colored shades have better transparency, but they are easy to get rid of dust, and they should be diligent in wiping so as not to affect the penetration of light; If it is non-metallic, wipe with a damp cloth to avoid dust accumulation and affect the lighting effect.
Moisture can easily cause rust and paint loss, and shorten the service life of the luminaire. Therefore, moisture protection is the key to the maintenance of lighting, especially the bathroom, bathroom lighting and kitchen stove lamp, must install moisture-proof lampshades to prevent moisture intrusion, to avoid rust damage or leakage short circuit.
It is best not to use water to clean the lamps. Just wipe it with a dry cloth and wipe it with water. If you accidentally touch the water, try to dry it. Do not wipe it with a wet cloth immediately after turning on the lamp.
LED inground Light Co., Ltd. , http://www.led-underwaterlight.com