Hot speed to launch LED street light module with 60 lm/w light efficiency

The hot speed has introduced a 50W LED street light module. Compared with the modules introduced by other companies, the products with hot speed have the following two outstanding advantages:


50W LED street light module
1. The power of a single chip is 2.5W. Compared with two LED street lights (light source power) with the same power of 100W, other companies should use 100 1W LED chips, and the heat speed is only 40, which can effectively reduce the overall LED chip. cost.
2. The heat sink IVC is adopted, which is a vacuum uniform temperature plate structure, which is composed of an inner hollow metal and is sealed with a small amount of liquid. When the LED starts to emit light and generates thermal energy, the liquid near the heat source will begin to vaporize and rapidly diffuse. The heat generated by the high-power LED can be quickly removed through the capillary structure system, and simultaneously condensed into a liquid and returned to the vicinity of the heat source. As long as there is a slight temperature difference, this vapor-liquid circulation motion will not stop. This architecture reduces the temperature of the LED chip, thereby prolonging the life of the LED, enabling high-power LED luminous efficiency, and solving the problem of light source luminance attenuation (light decay) more effectively than other various heat dissipation methods.


IVC internal vapor-liquid circulation schematic diagram According to the local standard of LED street lamps in Guangdong (implemented), the definition of LED module is: a combined illumination light source device. In addition to one or more light emitting diodes (LEDs), other components, such as optical, mechanical, electrical, and electronic components, may be further included, but do not include control devices.
The company's 50W LED street light module is made up of 20 chips soldered on a specially designed copper substrate, and the copper substrate is attached to the heat sink IVC for optimum light efficiency and long life. The characteristics of the hot speed company module are as follows:
1. Adopt international famous brand LED chip, after installing the lens and lampshade, the overall luminous efficiency reaches 60 lm/w.
2. With advanced optical lens, it can reach a rectangular projection range of 1:4.
3. Using the heat sink IVC, the junction temperature of the LED chip is further reduced, so that the chip has a longer life.
4. The best heat sink fins developed by the heat sink experts.
5. Easy to maintain, easy to repair.
The 50W LED module with hot speed can also be combined into 100W or other power LED street lamps, suitable for all levels of road lighting. The heat is expected to cooperate with street lamps factories with many years of experience to jointly develop LED street lamps to prepare for the upcoming high-pressure sodium lamp replacement boom.
The company is a company that develops and markets LED lighting sources and equipment. The company is committed to providing high-quality green, environmentally-friendly and energy-saving light source equipment and services for the development of the company, and to achieve the strategic development goals of the global level of green lighting companies.

Chaff Cutter

Chaff Cutter,Chaff Cutter Machine,Mini Chaff Cutter,Hand Chaff Cutter

Hunan Furui Mechanical and Electrical Equipment Manufacturing Co., Ltd. , http://www.frcornthresher.com