How to select LED lamps for factory lighting

According to the floor height, the industrial plant is divided into high ceiling lighting and low ceiling lighting. The lighting required for the operating environment requires scientific design to ensure the comfort and safety of workers, and improve work efficiency and product quality. Therefore, the introduction of high-efficiency lighting fixtures also requires control technology to improve lighting effects and reduce energy consumption.

A, high ceiling lighting

The roofs of industrial plants with large machinery are very high, and LED flood lights with high luminous flux and high efficiency are generally used. Considering the height of the ceiling and the design illumination, it is necessary to select the appropriate light fixture. Mid-height ceilings with installation heights of around 5-10M are recommended with mid-range and wide-range lighting fixtures, with uniform illumination angles, no glare, and no flash. (The plant uses 250W high pressure mercury lamp)

Second, the low ceiling lighting

Most of the low-ceiling industrial plants have smaller production lines and assembly lines, and the lighting devices are recommended to use LED fluorescent tubes with higher luminous efficacy, plus grille lamp panels. (The plant uses explosion-proof fluorescent tube shades fitted with two grids). With a high installation guidance of 2 to 4M, a straight tube LED light source is a better choice. Warm white light sources create a comfortable environment with natural color, high light efficiency, and long life.