Hanying City Lanying Dafuxin Petroleum Co., Ltd. will publicly invite tenders for the construction and supervision of the new high-tech R&D center building in Puzhen Industrial Park in accordance with the approval requirements of the document [2012] No. 105 of the Development and Reform Commission of Han District. The relevant matters are announced as follows:
I. Project Overview:
The construction site of this project is located in Puzhen Industrial Park; the scale and content of the project: the construction of a new high-tech product R&D center building; the total construction area is about 9,431 square meters, 13 floors above the ground, and the building height is 46.05 meters; the funding source is government investment and self-raising.
Second, the applicant qualification requirements:
1. The construction registration company must have three or more levels of qualification for general contracting of building construction issued by the construction administrative department and obtain a safety production license. The person in charge of the project must possess the qualifications of a registered construction engineer who is a Grade II or above registered in the building construction project issued by the construction administrative department, and obtain a production safety assessment certificate (Jianan B certificate).
2. The supervision registration enterprise must have the qualification grade C or above of the construction supervision issued by the construction administrative department. The project director must have a provincial-level registered supervision engineer for housing construction engineering.
Third, prequalification notice:
1. This project uses qualification prequalification method for the qualification review of bid applicants. Prequalified applicants must purchase the prequalification documents at the prescribed time and place by the person in charge of the project planning to participate in the project.
2. Construction and supervision companies must bring in their pre-qualification documents, including the introduction letter of the entity, a copy of the business license, a copy of the enterprise qualification certificate, a copy of the safety production license, the project manager (project director) ID card registration certificate, and the class B safety assessment. The relevant originals of the card and credit handbook (except registered in Hanzhong City's overseas enterprises but required to provide proof of non-construction projects) and other relevant originals shall be submitted for inspection and a set of copies shall be submitted. Those who do not meet the conditions shall not be accepted. Business licenses, qualification certificates, and safety production licenses of enterprises may provide original copies or copies of official seals.
Fourth, prequalification documents acquisition time: March 16, 2017 to March 22, 2017 (except holidays).
Working hours: 8:00-12:00 in the morning, 14:00-18:00 in the afternoon
Front Side (−): Silicon oxide + blue silicon nitride compound anti-reflection coating (PID Free) ; The front side is a half-cut design; The busbar head is a large double fork, and the pads of the busbar are intermittently stepped. The size of the head pad is 1.2 ± 0.15mm * 1.3± 0.15mm, and the middle pad of the busbar size is 0.8±0.15mm*1±0.15mm.
Back Side (+): Passivated layer (AlOx and SiNx) and Rear Contact (Al); the rear electrode is composed of 10 roots rear compound busbar and 160 roots rear Al fingers. The composite busbar is locally narrowed, and the width is 1.5 ± 0.3mm and 1.0 ± 0.3mm, respectively. 8 sections 1.45±0.3 mm silver anode, no laser pattern under the rear electrode. Silver electrode has round head, and silver electrode is 1.5±0.6mm hollow at both ends.
Panel Solar Cell,Solar Cell System,Solar Cell Module,High Efficiency Solar Cell
Wuxi Sunket New Energy Technology Co.,Ltd , https://www.sunketsolar.com