Faced with this situation, in order to co-exist for the complete machine factory and the component factory, as a complete machine factory, on the one hand, the component factory should be guided to gradually strengthen the material certification; on the other hand, it must reach an agreement with it to monitor its material changes . The practice in this regard is to require manufacturers to apply for any changes in materials, molds, processes, origin, market, etc. using the unified form "Supplier Product Change Application Form" developed by our company. Changes can only be made after approval. This will minimize the risks involved.
Poor design of components Poor design is a congenital deficiency. If it is not discovered and remedial measures are not acquired, the probability of occurrence is very high, and it usually breaks out in batches. This type of defect is highly concealed, and it is difficult for the complete plant to find, and the damage to the complete plant is also the biggest. The manufacturer riveted the porcelain rod to the copper cap and then welded the pin to the copper cap. The disadvantages of its design were: poor peel strength of the pin; complicated production process; high material cost and many working hours. Our company requires the manufacturer to improve the design when it is identified, and the pins and the copper cap are directly integrated. Its advantages: good pin peel strength; simplified production process; saving material costs and working hours.
Glass Glaze Resistor Design In order to detect poor design at an early stage, the current popular method in the world is to use the "failure mode effect analysis" method. The following is a brief introduction to the implementation steps of FMEA. In the entire process of FMEA, if the various potential failure modes cannot be listed in the early stage of the design, the problem cannot be solved.
Various products of Cob Track Lights, providing product images and basic parameters with each COB Track Lights and COB Track Lights; We are a professional Chinese manufacturer of COB Track Lights, and look forward to your cooperation!
LED Track Lights Advantages: Cost-sffective, can reach to 70lm/WAttractive appearance, strong metal feeling Good thermal conductivity, low temperature,good performance.
Led Track Lights,Cob Track Lights,20W Led Track Lights
SHENZHEN KEHEI LIGHTING TECHNOLOGY CO.LTD , https://www.keheiled.com