Shanghai, China, October 25, 2016 – The most important passive safety equipment in the automotive industry is seat belts, airbags and tire pressure monitoring systems. With the concept of energy conservation, environmental protection and safety becoming more and more popular, people have put forward higher requirements for the safety of automobiles, especially the tire pressure monitoring system that is getting more and more attention.
As one of the safety equipment, the tire pressure monitoring system can promptly report the danger when the tire has dangerous signs, reminding the driver to take corresponding measures, thus effectively avoiding the accident. In countries such as Europe and the United States, tire pressure devices have begun to be implemented as standard. In recent years, many people in China have begun to install this configuration. After all, it is about whether the car can run normally and safely.
Mandatory national standards impose higher requirements on tire pressure monitoring sensors
It is understood that the Ministry of Industry and Information Technology of China recently took the lead in reviewing and passing the Manuscript of the Mandatory National Standard for the Performance Requirements and Test Methods for Passenger Car Tire Pressure Monitoring System (GB26149) (hereinafter referred to as the “Standardâ€).
Once the mandatory Standards are implemented, on the one hand, the level of safety and energy-saving technologies for vehicles will be promoted, and on the other hand, the technical requirements for the components of the tire pressure monitoring system will be more stringent. Based on this, Infineon has launched a new generation of tire pressure monitoring sensor SP40, which is aimed at the needs of Chinese companies, while optimizing product performance, energy consumption and reliability, providing cost-effective for China's tire pressure monitoring module manufacturers. solution.
SP40 builds comprehensive optimization of product performance based on market demand
Following the great success of the previous generation of tire pressure monitoring sensor SP37, Infineon introduced a smaller package (59% smaller), lower power consumption (quiescent current from 550nA to 245nA), and greater storage capacity. (6K Flash is increased to 12K Flash), the SP40 is a new product with higher measurement accuracy (10-bit ADC is increased to 13-bit ADC). In addition, the SP40 only needs a 26MHz crystal to support two operating frequencies simultaneously - 315MHz and 434MHz, while SP37 requires two crystals to support these two operating frequencies.
In order to better serve Chinese customers and meet the needs of Chinese customers, SP40 has optimized the needs of Chinese customers. Not only in providing cost-effective, high-quality products; in the service system, it also provides full Chinese webpage and document support to help customers understand products faster and better; in sales channels, through agents who have cooperated for more than ten years This efficient service channel serves end customers. These agents are very familiar with Infineon's products, and have a wide range of personnel, responding quickly to customer inquiries, delivery and other aspects. Infineon will continue to provide high quality and high performance products to ensure better service to customers.
About Infineon
Infineon Technologies AG is the world's leading semiconductor technology company, making people's lives more convenient, safe and environmentally friendly. Infineon's microelectronics products and solutions will lead you to a bright future. In FY2015 (ending September 30), the company's sales amounted to 5.8 billion euros and it has approximately 35,400 employees worldwide. Infineon is listed on the Frankfurt Stock Exchange (ticker symbol: IFX) and the US over-the-counter market OTCQX InternaTIonal Premier (ticker symbol: IFNNY).
Infineon in China
Infineon Technologies AG officially entered the Chinese market in 1995. Since the establishment of the first company in Wuxi in October 1995, Infineon's business has grown very rapidly. With approximately 2,000 employees in China, it has become an important driving force for Infineon's Asia Pacific and global business development. Infineon has established a complete industrial chain covering R&D, production, sales, marketing and technical support in China, and has carried out in-depth research with leading domestic enterprises and universities in sales, technology research and development, and personnel training. Cooperation.
Aluminum Cap are available within the range of DN 15 – DN 500.
Our high-quality and corrosion resistant Aluminum Pipe End Cap come in various sizes and schedules to fit your Aluminum Fitting needs.
Aluminum Cap is a type of Aluminum Fitting that covers the end of a pipe.On a weld, if it is a temporary close, or the contractor wants to add to the piping system in the future, he or she should allow additional pipe before closing so the Aluminum Pipe End Cap can be cut off and the pipe system extended as needed.
Thickness :
3mm-50mm
Outer diameter:
15mm-500mm
Alloy Grade:
1000 series : 1070A,1060,1100,1200
2000 series :2A11,2017,2A12,2024
3000 series :3003 3A21
5000series :5A02,5052,5A03,5A05,5A06,5083,5086,5454
6000 series :6061,6063,6A02,6082,6005
Surface
Mill Finish, Anodized, Powder Coated, Wooden Finish, Polish
Packing
Export standard
Payment Terms
100% irrevocable L/C at sight or 30% T/T in advance as deposit,70% balance before shipment
MOQ
1 Piece
Delivery time
20-45 days after receiving L/C or deposit
Loading Port
Xingang Port,Tianjin
Aluminum Pipe End Cap,Aluminum Fitting,Aluminum Cap,Aluminum 6063 Cap,Aluminum 1060 Cap
HEBEI HANMAC MACHINE CO., LTD. , https://www.chinahanmac.com