Neural network classification
After the feature extraction and selection are completed, the classifier is used to classify the image target. In this paper, the BP network in the neural network is used for classification. When designing a neural network structure, the number of layers of the network, the number of neurons in each layer, and the activation function of each layer must be considered. The standard BP neural network is divided into 3 layers, namely the input layer, the hidden layer and the output layer.
According to this layering, because the input of the neural network is the output of feature selection, it is selected from 1 to 9, and the number of neurons in the input layer of the neural network should be selected from 1 to 9. The number of neurons in the output layer can be the number of target categories to be classified, or it can be encoded according to the category to meet the output of m categories. An output unit is used, that is, the output of two categories 
= 1 output unit. When the output is 1, it can be determined as the first category, and when the output is 2, it is the second category. The selection of the number of hidden layer units is a complex problem, that is, the number of hidden layer units is directly related to the requirements of the problem and the number of input and output units.
For the BP network used for classification, because the input and output of the hidden layer unit are monotonically rising non-linear functions, the number of hidden layer units may be too small to train, or the network is not strong enough to recognize The samples we see have poor fault tolerance, but too many hidden layer units make the learning process too long, and the error is not necessarily optimal, so there is an optimal number of hidden layer units. The solution is given below
Analysis of classification results Figure 2 is the original remote sensing image. Through manual interpretation, it is determined that the features in the image are divided into roads, residential areas and high-rise buildings. Each class selects 1,000 learning samples, a total of 3 000 learning samples. Three of the nine feature quantities are selected, so the number of nodes in the input layer of the network is three. After calculation, the hidden layer takes five nodes.
Philizon enjoys a high reputation in Grow Light and Aquarium Led Light fields throughout Europe and America, Philizon also insists on taking high technology to design the newest&best Industrial Grow Light and aquariumlight constantly as the market request. Our R&D team with more than 10 people has rich experience in appearance design, electronic structure,heat dissipation simulation analysis, optical lens design, lightcontrol system etc. Most of our hydroponics full spectrum Led Grow Lighting and marine coral reef ledaquarium lighting are private modules,we have 10 more design patent and utility model patent till now.
Our Industrial Grow Light is popular in led market, cause its elegant outlook and its high quality and competitive price.
What is Full spectrum led chip ?
It is the newest trend for indoor plants. Advanced Led Grow Lights chip,not provide sigle color ,provide broad spectrum 400nm~840nm,simialr with sun light ,but most is red and blue,it is best for plant grow.This is a revolutionary step for Grow light which have previously been unable to act as the sole light source for the indoor garden.Suitable for all stages of plant growth.
Advtanges:
Upgraded Epistar chips,High Lumen,High penetration.
Plug with listed certificate safe to use.
The Plug you can choose
Ageing Test
Our Quality Control systems
Package
Our professional Square Grow Light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.
Warnings:
1.lndoor use only.
2.To avoid being damaged,do not use water or drip irrigation while using.
3.Sunshine lighting time should be 12-18 hours.
4.While irradiating the plants,the height of led grow lamp is not less than 10 inches,low height will cause the destruction of plants.
5.Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hung too high.
6.While taking care of the plants, please spray the leaves and branches 2-3 times everyday,to ensure the the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp.
Our Company
Trade Terms
Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)
Sample will be delivered within 7 working days.
Discounts are offered based on order quanlityes.
MOQ:sample order are acceptable
Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.
Philizon Industrial Grow Light are perfect for green house applications and much more!
Led Commercial Grow Light,Led Grow Lights,Flower Plant Led Grow Lights,Fruits Plants LED Grow Light
Shenzhen Phlizon Technology Co.,Ltd. , https://www.philizon.com