Static route configuration example
In this example, use the IP ROUTE command to configure a static route: ip route 129.1.0.0 16 10.0.0.2
Command description: ip route configures a static route to the target network (129.1.0.0).
16 The Mask length of the target network can also be expressed in dot division, such as 255.255.0.0.
10.0.0.2 The IP address of the next router (next hop) through which packets to the target network pass.
Through this configuration, a static route to the target network network 129.1.0.0/16 is configured on the router Quidway A. This path passes through the router Quidway B. The target network is connected to the Ethernet port of the router Quidway B.
Day by day more and more mobile phones are with usb-c port, which makes Type C Phone Charger very popularly used in the market. Type c phone charger have desktop type and wall type, and there are usb-c 2.0 and usb-c 3.0, usb-c 3.0 is much faster than usb-c 2.0, and more popularly used currently, usb-c 3.0 output is normally 3.8V-6.5V 3A, 6.5V-9V 2A, 9-12V 1.5A 18W, it is with PD, PD means power delivery, which can transfer high power at one time, this is why your mobile phone and tablet can be charged fast! And one more point, if normal usb-c port not with PD, the output is only 5V 3A, it doesn`t charge so fast like the one with PD.
Yidashun not only has home type-c phone charger 12W 18W 30W 48W 60W, but also car usb-c phone charger 24W, and they are also with usb-ports, which can charge all different devices at one time anywhere!
Type C Phone Charger
Type C Phone Charger,Type C USB Phone Charger,USB C Phone Charger,Type C Phone Power Charger
Shenzhen Yidashun Technology Co., Ltd. , https://www.ydsadapter.com